Posted on

Natural Building & appropriate technology’s blog 22

Article 22 of Natural Building and Appropriate Tech Internship

One week without article? Sorry guys but finally after one week here are the updates.

In the last article I told how Angry Ben did an awesome job of listing all the projects to empower us to lead each one of them. So every morning after our little check-in we have the projects check-in. Where every leader of each project tells the other students at which stage they are and what are the next steps. This allow us to split ourselves more efficiently.

So let’s have an overview of what has been done in the different projects over this last week.

First big main project, the building! We are at the stage where the main focus is the roof. It is a slow and precise work. Only two to three persons can work on this and it is important that nobody is under them while they are working. We would not like a hammer or a saw to fall on someone’s head.

Our super structure is getting more and more complex. We now have three more poles at the back of the sleep-out to support the four rafters. And the rafters themselves are there to have the purlins on them. A few more purlins to go on the back and very soon the roof will be put into place.

DSC01080

The super structure.

More bracing is needed also to reinforce the tensile strength of the building to be more resistant to the earthquake. So a few more bracing here and there are being put into place. For the purlins we have been using a metal bracing system. As shown on the picture.

DSC01846

While all the work was in process in the air some more jobs have been done on the ground like filling in more material to raise the floor and also a big job was to paint the whole bond beam to protect it from the moisture. The bottoms of our studs have also been painted which is going to allow our super structure to stay as dry as possible.

 

DSC01800

Shelly painting the first layer on the bond beam.

So now let’s move on on the other projects.

The plaster crew. They did a nice job of creating different plaster and yesterday they used their special cow dung fermented plaster! It may sounds occurred at first sight and it does smell a little bit but the result looks really nice on the wall. I am definitely waiting for the little presentation that they are preparing about all their experiment and different recipes.

 DSC01769

Laying on the wall their different mixes.

And since Monday a new project on the horizon, the human powered bicycle washing machine! This is exciting. We have been washing our clothes in a bucket these last weeks. Is it going to be more effective than our hands in a bucket? For how long are we going to pedal for our clothes to be considered “clean”? I am really looking forward to find the answers of these questions. It is also a challenge of physics. Where are our forces going? What are the good ratio between the gears to be effective? And so on… Lot’s of good stimulations for the brain.

DSC01850

The team discussing some possibility for the project to be.

Now time for my favourite project, the ram pump! The first design is working and we are really happy about that. Now how can we improve our design? Basically we are pumping water from a little muddy creek. We take water from this place because it as a sufficient height for the ram pumps to work. But this creek is joining a stream that has a higher quality and cleaner water. Ideally we would like to drink this water, not the muddy one! But the stream has not a sufficient height for the ram pump to be pumping.

 

Here is the challenge: how can we pump the clean water using the forces of the muddy water? It is tricky but possible. And here is our design.

 

DSC01823

The magic piece!

Basically we transfer the force of the water from the creek through a diaphragm which is going to pump the clean water of the stream. And guess what? It is working! This was pretty amazing. But now we face another challenge. Our concept is working but it is not efficient. The amount of water that we are able to pump is very small. This is the time where and engineer can become very useful by calculating the good material that we need for a diaphragm (we used a car tube) and the size of the chamber allowing water to be pushed forward. 

But we don’t have one. So we are checking different possibilities that we will discuss in a future article.

 That’s quiet a few projects running at the same time. And on top of that during the week-end we had the construction of a rocket mass heater and a mud floor in the tipi. It was great to do this all together and I am looking forward for next week-end to see how the final result will be.

DSC01128

The Rocket Mass Heater being built in the tipi.

 

 ~Oscar Morand, 2 April 2013, Natural Building and Appropriate Technology Intern

Leave a Reply

Your email address will not be published. Required fields are marked *